SANIFOS 110

An automatic lifting station that can be used for pumping residential to industrial waste water when the sewer is at too high a level for natural gravity drainage.

  • Designed for drainage of a single dwelling incorporating WC, bathroom, kitchen, utility room
  • Powerful automatic motor with quiet operation
  • Easy handling for installation below ground level
  • Pumps up to 11m vertically or 110m horizontally

The Sanifos 100 is an automatic lifting station for residential or industrial waste. It can take waste from a toilet, basin, bath, shower, bidet, washing machine, dishwasher and sink. It is designed to take waste from a single residential dwelling. It has a single macerator pump with float activation method and has robust cutting blades to prevent clogging. The Sanifos 110 has a powerful automatic motor with quiet operation and a 110 litre storage tank. It offers easy handling for installation below ground level. The Sanifos 100 has two inlets that can take up to 110 mm and an additional two inlets that can take up to 50mm, and it discharges through 40 or 50mm pipework An external non return valve and shut off valve are needed for this unit. The Sanifos comes with a 2 year warranty. 

Designed, made and tested in our factory in France and with 60 years of expertise and innovation, the Sanifos offers you peace of mind and with the back up from our service team there’s never been a better time to install a Saniflo.

SANIFOS 110 datasheet

Weight
23 kg
Inlet diameter
2 inlets Ø ext. 100/110; 2 x Ø ext. 40/50
Motor power
1500 W
Supply voltage
220-240V/50Hz
Maximum flow rate
11 m³/h
Maximum current consumption
6 A
Maximum incoming water temperature
70 °C intermittently (max 5 min)
Discharge pipe diameter
DN40 (Ø ext. 50 mm)
Maximum recommended depth
11 m
Tank volume
110 L
Vent diameter
1 x Ø ext. 75
Maximum depth (Q eq 0 m3/h)
14 m
ON/OFF level
320/120 mm
Materials
Polyethylene
Incoming water flow (FEA)
182 mm
Activation method
Float
Thermal overload protection
Yes