SANIFOS 500

A dual motor lifting station that can be used for pumping residential or industrial waste water when the sewer is at too high level for natural gravity drainage

  • Designed for drainage of a single dwellings with multiple storeys, incorporating WC, bathroom, kitchen, utility room
  • Contains two separate load balanced pumps with high performance macerating systems that will operate alternately for a failsafe system
  • In the event or inflow overload, both motors run at the same time, or in the unlikely event that one motor fails, the other one will take over
  • Pumps up to 11m vertically or 110m horizontally

The Sanifos 500 is an automatic lifting station for residential or industrial waste. It can take waste from a toilet, basin, bath, shower, bidet, washing machine, dishwasher and sink. It is designed to take waste from a single residential dwelling with multiple storeys including bathroom, kitchen, utility room etc. It comes in two versions the first comes with two separate load balanced macerator pumps with high performance robust cutting blades to prevent clogging and has powerful automatic motors with quiet operation. The second version is Vortex version that comes with a large bore vortex pump which can pump away waste without the need to macerate. The Sanifos 500 has a 500 litre storage tank and offers easy handling for installation below ground level. The Sanifos 500 has six inlets that can take up to 125 mm, and it discharges through 40 or 50 mm pipework.

The Sanifos comes with a 2 year warranty.


Designed, made and tested in our factory in France and with 60 years of expertise and innovation, the Sanifos offers you peace of mind and with the back up from our service team there’s never been a better time to install a Saniflo.

SANIFOS 500 datasheet

Weight
89 kg
Inlet diameter
6 inlets Ø ext. 50/40/100/110/125
Motor power
SANIFOS® 500 Macerator (single-phase): 2 * 1500 W; SANIFOS® 500 Vortex (single-phase): 2 * 2600 W; SANIFOS® 500 Vortex (three-phase): 2 * 2600 W
Supply voltage
220-240V/50Hz
Maximum flow rate
SANIFOS® 500 Macerator (single-phase): 11 m3/h; SANIFOS® 500 Vortex (single-phase): 27 m3/h; SANIFOS® 500 Vortex (three-phase): 36 m3/h
Maximum current consumption
SANIFOS® 500 Macerator (single-phase): 2 * 6 A; SANIFOS® 500 Vortex (single-phase): 2 * 4.75 A; SANIFOS® 500 Vortex (three-phase): 2 * 4.75 A
Maximum incoming water temperature
70 °C intermittently (max 5 min)
Discharge pipe diameter
SANIFOS® 500 Macerator (single-phase): : DN 40 (ext. 50 mm); SANIFOS® 500 Vortex (single-phase): DN 50 (ext. 63mm); SANIFOS® 500 Vortex (three-phase): : DN 50 (ext. 63mm)
Maximum recommended depth
SANIFOS® 500 Macerator (single-phase): 11 m (DN 40); SANIFOS® 500 Vortex (single-phase): 11 m (DN 50); SANIFOS® 500 Vortex (three-phase): 15 m (DN 50)
Tank volume
500 L
Vent diameter
2 x Ø ext. 75
ON/OFF level
400/100 mm
Materials
Polyethylene
Incoming water flow (FEA)
311 mm (with extension: 611 mm)
Activation method
Float
Thermal overload protection
Yes